A brand new 15watt water-cooler laser module
Get all you need in the package
- Laser module with a water-cooled heatsink
- Laser box ver 2.0
- Water pump
- Thermometer
- Silicon tubes
10 mm (2/5″) wood and plywood laser cut with Endurance 15 watt water-cooled laser.
Real power and real quality by Endurance Lasers!
Fabric (textile) laser cutting with 15 watt water – cooled laser installed on CNC 3018
Characteristics
Type of laser diodes: Z80
Wavelength: 445 nm
Optical power: 14W
Lens type: 2 x G7
Focal length: 30 mm (from the bottom edge of the laser)
Air blowing: Air nozzle V1
Working temperature: 15-35 C
The critical temperature for laser operation: 45-50 C
Laser diode cooling type: Water
The internal diameter of cooling system hoses: 4-5 mm
Dissipated thermal power: 38W
Consumed voltage: 12V
Current consumption: 7 A
Laser diode control board: 2 x Endurance MO2 PC
Ability to turn on only one laser diode: Yes
Laser diode overheating protection: Yes
Operating modes: "Full Power", "PWM", "Analog", "Focus mode"
Input control signals: PWM 3-24 V frequency 90-50000 Hz (maximum PWM duty cycle 99.9%), Analog 0-10 V (0-100%)
Cable length from box to laser head: 1.5 m
Material: Aluminum
Overall size: 75x97x68mm
Weight: 590g
Control box:
Material: PLA plastic
Overall size: 182x152x85 mm
Weight: 950g
Kit composition:
1. Laser head
2. Control box
3. Power supply 12V 8A
4. Two hoses 1.5m long for connection to the cooling system
5. Set of fasteners
6. Safety glasses
7. Focusing plate
8. Protective gloves
9. Stickers
General arrangement of the laser head
Control box controls
1 - Box power button
2 - Switch of the laser diode control unit No. 1
3 - Switch of the laser diode control unit No. 2
4 - Button for switching laser modes
5 - Input voltage indicator for laser diode No. 1
6 - Input voltage indicator for laser diode No. 2
7 - Output voltage and current indicator for laser diode No. 1
8 - Output voltage and current indicator for laser diode No. 2
9 - Laser diode temperature controller #1
10 - Laser diode temperature indicator No. 1
11 - Indicator of the set maximum temperature of the laser diode No. 1
12 - Laser diode temperature controller #2
13 - Laser diode temperature indicator No. 2
14 - Indicator of the set maximum temperature of the laser diode No. 2
15 - Power supply connector
16 - Wires for laser control via PWM signal 3.3-12V / analog signal 0-10V
17 - Wires for laser control via PWM signal 12-24V
18 - Cable connecting box and laser head
15 watt DIODE LASER FIRST LAUNCH
Thick wood / plywood laser cutting with Endurance REAL 15 watt DUOS water cooled laser
Impressive laser cutting of 10 mm (2/5″) wood. Cutting “LOVE” outline shape.
445nm 15000mW Laser Module with water Heatsink TTL/PMW + Analog 0-10V for DIY 3D Printer | Laser CNC machines
Size: mm
Laser wavelength: 445 +-2 nm
Power supply voltage: 12VDC (9-16VDC）
Supply current:> 8A
The laser beam form:
First Laser diode laser beam spot 180×17 um (focal depth is 2 mm). 160-170 kW / cm^3
Second laser diode laser beam spot: 21×350 um (focal depth is 3.75 mm) 100-100 kW / cm^3
Lens Material: Optical glass coated with AR coating (G2 lens)
Shell Material: Polished aluminum
Cooling method: water
Tested for 168 hours nonstop
Lifetime warranty.
Can Engrave on:
Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/anodized Aluminum/ Metal/Glass/Stone/Ceramics/PCB/
CW Optical power output: 14-15W (14000-15000mW)
Impulse pptical power output: 15-18W (15000-1800mW)
Safe temperature range: <60 ℃
Manual PWM control: YES
Temperature display: YES
Can Cut: MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper